Transforaminal Lumbar Interbody Fusion (TLIF) | ANS Spine Center NJ
  • Transforaminal Lumbar Interbody Fusion (TLIF)

    Transforaminal lumbar interbody fusion (TLIF) is is an adaptation of a posterior lumbar interbody fusion that is often performed as a minimally-invasive surgical (MIS) procedure (see minimally invasive TLIF). TLIF is used to restore disc height and permanently fuse damaged or displaced vertebrae in the lower back. Conditions such as degenerative disc disease, spinal stenosis, or spondylolisthesis can cause spinal instability and considerable pain. TLIF is used to stabilize the spine by restoring disc height and fusing the vertebrae together and alleviating nerve compression.

    There are several potential advantages of TLIF over the standard posterior approach:

    • The procedure can allow your doctor to fuse both the anterior and posterior portions of your spine through a single posterior surgical approach.
    • TLIF increases the chance for a successful fusion due to the larger area for bone graft placement. Bone graft can be placed both in the area behind the vertebrae, to the side of the vertebrae, and in the disc space between the vertebrae.
    • Because the approach to your disc space and spinal canal with TLIF is from your side, this allows your doctor to perform the operation with minimal stretching of your nerve roots. The exposure of your spinal canal is done from one side only.
    • TLIF uses a special spacer that is placed between your vertebrae to help restore the space between the vertebrae (the disc space). This can help reduce irritation and pressure on your nerve roots from bone spurs and thickened ligaments that can be a source of leg pain.

    During the TLIF procedure, your doctor will have you lie face down on a special surgery frame. This position allows your doctor to operate on the back of your spine. It also lets your abdomen relax, which reduces blood loss during the procedure. General anesthesia is used, meaning you will be asleep during surgery.


    Procedure

    During the TLIF procedure, your doctor will have you lie face down on a special surgery frame. This position allows your doctor to operate on the back of your spine. It also lets your abdomen relax, which reduces blood loss during the procedure. General anesthesia is used, meaning you will be asleep during surgery.

    TLIFA vertical incision is made over the section of your spine to be fused. Some doctors perform the TLIF surgery "percutaneously," which means that only two small openings are made in your skin. Your skin, muscles, and soft tissues will be gently pulled aside.

    Your doctor will work through the main incision and separate your tissues over the back part of your iliac crest. A small amount of bone will be taken from this part of your pelvis and prepared for use later in the TLIF procedure.

    Your doctor will then prepare to insert pedicle screws into your spine by watching on a fluoroscope (an X-ray that can be seen on a video screen) to determine the exact spot to place the screws. The screws are inserted through the pedicle bones of the vertebrae to be fused. For example, if two vertebrae are in need of fusion, four screws are used, two on the left and two on the right.

    our doctor will enlarge the opening around your nerve root, called the foramen. A special instrument called an osteotome will be used to cut the bone that surrounds this passageway. Enlarging the foramen takes pressure off your nerve root and gives your doctor more room to do the TLIF surgery through the foramen. ("Transforaminal" means through the foramen). The nerve root going through the foramen is gently moved aside for the remainder of the TLIF procedure.

    TLIFThe disc between the two vertebrae to be fused will be removed. Your doctor will remove the disc by inserting a special surgical tool called a rongeur through the foramen and cutting a small "window" into the back of the disc. The disc is removed by working from the back toward the front of the disc space. When the disc and remaining fragments have been cleared away, your doctor will prepare the bony surfaces of the vertebral bodies where the disc was removed.

    The surface of the vertebral body within the disc space is called the end plate. By peeling off the end plate with a curette, your doctor causes bleeding to occur. The bleeding is needed to stimulate healing of the bone graft that will be placed into the interbody space.

    Your doctor will prepare to insert the spacer into the disc space between the vertebral bodies. The spacer, sometimes called a "fusion cage," is made either of bone, titanium, or carbon fiber reinforced polymer. Most spacers are hollow so bone graft material (taken from your pelvis or in the form of a bone substitute) can be packed inside the spacer. Your doctor will measure the size of the disc space to ensure the best fit of the spacer.

    Working through the foramen, your doctor will insert the bone graft material into the front half of the disc space. Next, a spacer will be placed into the back half of the disc space and pushed as far as possible to the opposite side. A second spacer will be inserted next to the first spacer. This completes the steps for fusing the front of the vertebrae (the anterior column).

    Stabilizing the posterior column is completed by adding strips of bone graft along the side and the back of the vertebrae to be fused. Next, your doctor will realign the surgery frame to give your low back a slight inward curve. Metal rods or plates are attached to the pedicle screws. Tightening this instrumentation compresses the vertebrae to be fused.

  • Watch Video

Untitled Document

Fellowship Spine Surgeons